>  tools

​​​​​​​​​​​​​​

​U​se the tool bank below to find an attachment point that is compatible with your tool.
Tools
Adjustable Pipe Wrench
D-ring Cord—Tools up to 5 lbs (2.3kg) Instruction Guide
For Pipe Wrenches weighing up to 5 lbs (2.3kg), the D-ring Cord allows for quick installation and can be used with a large number of tool lanyards.

D-ring Cord Products

Back to top


Adjustable Pipe Wrench
Tool Cinch Medium Duty—Tools up to 35 lbs (15.9kg) Instruction Guide
Tool Cinch Products

Adjustable Pipe Wrench
Medium Duty Bungee Tether—Tools up to 35 lbs (15.9kg) Instruction Guide
On larger Pipe Wrenches (weighing up to 35 lbs), there are often times large predrilled holes near the base of the handle. A Medium Duty Hook2Loop Bungee Tether can be cinched through this connection point.

Medium Duty Hook2Loop Bungee Tether

Adjustable Pipe Wrench
Bungee Tether—Tools up to 15 lbs (6.8kg) Instruction Guide
If a Bungee Tether is preferred by the user, a Hook2Loop Bungee Tether can be used to cinch directly to a Pipe Wrench weighing up to 15 lbs. Commonly used by the following crafts: Boilermakers

Medium Duty Hook2Loop Bungee Tether

Adjustable Wrench
D-ring Cord—Tools up to 5 lbs (2.3kg) Instruction Guide
D-ring Cord Products

Back to top


Adjustable Wrench
Quick Ring—Tools up to 2 lbs (0.9kg) Instruction Guide
Quick Ring Products

Adjustable Wrench
Tool Cinch Medium Duty—Tools up to 35 lbs (15.9kg) Instruction Guide

Adjustable Wrench
Bungee Tether—Tools up to 15 lbs (6.8kg) Instruction Guide
Commonly used by the following crafts: Iron Workers, Scaffold Workers

Air Impact Wrench
Tool Cinch Medium Duty - Single Wing, Quick Wrap Tape—Tools up to 35 lbs (15.9kg) Instruction Guide
Tool Cinch Products
Quick Wrap Tape Products

Back to top


Aviation Snips
D-ring (0.5" X 2.25") and Quick Wrap Tape—Tools up to 2 lbs (0.9kg) Instruction Guide
Commonly used by the following crafts: Insulators, Millwrights

D-ring Products
Quick Wrap Tape Products

Back to top


Ball Pein Hammer
D-ring (1" x 3.5") and Quick Wrap Tape—Tools up to 5 lbs (2.3kg) Instruction Guide
Commonly used by the following crafts: Boilermakers, Millwrights

D-ring Products
Quick Wrap Tape Products

Back to top


Bandsaw (Electric)
Tool Cinch Medium Duty - Dual Wing, Quick Wrap Tape—Tools up to 35 lbs (15.9kg) Instruction Guide
The Dual Wing Tool Cinch should only be used with a Bandsaw if the two stabilization wings do not interfere with the trigger of the tool. Because this is not always possible, the Single Wing Tool Cinch is strongly recommended in many cases.

Tool Cinch Products
Quick Wrap Tape Products

Back to top


Bandsaw (Electric)
Tool Cinch Medium Duty - Single Wing, Quick Wrap Tape—Tools up to 35 lbs (15.9kg) Instruction Guide
Since the Single Wing Tool Cinch only has one stabilization wing, it is the ideal attachment point for Bandsaws as it will not interfere with the trigger of the tool. Commonly used by the following crafts: Iron Workers, Millwrights

Tool Cinch Products
Quick Wrap Tape Products

Bar Clamp
D-ring (0.5" x 2.25​") and Quick Wrap Tape​—Tools up to 2 lbs (0.9kg) Instruction Guide
If the Bar Clamp has no pre-drilled holes or handles, then a D-ring can usually be secured to the tool using Quick Wrap Tape.

D-ring Products
Quick Wrap Tape Products

Back to top


Bar Clamp
D-ring Cord—Tools up to 5 lbs (2.3kg) Instruction Guide
A D-ring Cord can be fitted onto many Bar Clamps with pre-drilled holes. It is important that the Tool Cinch be fitted around a part of the tool where there is no risk of the attachment point slipping off.

D-ring Cord Products

Bar Clamp
Quick Ring—Tools up to 2 lbs (0.9kg) Instruction Guide
Some Bar Clamps have pre-drilled holes that are compatible with Quick Rings. Commonly used by the following crafts: Boilermakers

Quick Ring Products

Beater Hammer
D-ring (1" x 3.5") and Quick Wrap Tape—Tools up to 5 lbs (2.3kg) Instruction Guide
D-ring Products
Quick Wrap Tape Products

Back to top


Beater Hammer
Tool Cinch Medium Duty - Single Wing, Quick Wrap Tape—Tools up to 35 lbs (15.9kg) Instruction Guide
Commonly used by the following crafts: Iron Workers, Welders

Tool Cinch Products
Quick Wrap Tape Products

Box Wrench
D-ring (0.5" X 2.25") and Quick Wrap Tape—Tools up to 2 lbs (0.9kg) Instruction Guide
D-ring Products
Quick Wrap Tape Products

Back to top


Box Wrench
Quick Ring—Tools up to 2 lbs (0.9kg) Instruction Guide
A Quick Ring can be fitted around a Box Wrench as long as there is no risk of the ring slipping off either end of the tool (multiple Quick Ring sizes are available). This is an ideal attachment point for Box Wrenches as it allows for the Quick Ring to rotate and move which helps prevent tangles, and stays out of the way of the user. Commonly used by the following crafts: Scaffold Workers.

Quick Ring Products

Bridge Clamp
Tool Cinch Medium Duty - Dual Wing, Quick Wrap Tape—Tools up to 5 lbs (2.3kg) Instruction Guide
For clamps weighing up to 5 lbs (2.3kg), the Tool Cinch and Quick Wrap Tape​ allows for quick installation and can be used with a large number of tool lanyards.

Back to top


C-Clamp
Tool Cinch Medium Duty - Dual Wing, Quick Wrap Tape—Tools up to 5 lbs (2.3kg) Instruction Guide
Tool Cinch Products
Quick Wrap Tape Products

Back to top


C-Grip
Tool Cinch Medium Duty—Tools up to 35 lbs (15.9kg) Instruction Guide
Tool Cinch Products

Back to top


Caulking Gun
D-ring Cord—Tools up to 5 lbs (2.3kg) Instruction Guide
D-ring Cord Products

Back to top


Chain Wrench
Tool Cinch Medium Duty - Dual Wing, Quick Wrap Tape—Tools up to 35 lbs (15.9kg) Instruction Guide
Commonly used by the following crafts: Boilermakers

Tool Cinch Products
Quick Wrap Tape Products

Back to top


Channellock Pump Pliers
Quick Spin—Tools up to 1 lb (0.5kg) Instruction Guide
Commonly used by the following crafts: Millwrights

Quick Spin Products


Back to top



Chipping Hammer / Welding Hammer
D-ring Cord—Tools up to 5 lbs (2.3kg) Instruction Guide
D-ring Cord Products

Back to top


Chipping Hammer / Welding Hammer
Quick Ring—Tools up to 2 lbs (0.9kg) Instruction Guide
Commonly used by the following crafts: Welders

Quick Ring Products

Chisel
D-ring (0.5" X 2.25") and Quick Wrap Tape—Tools up to 2 lbs (0.9kg) Instruction Guide
On larger Pipe Wrenches (weighing up to 35 lbs), there are often times large predrilled holes near the base of the handle. A Medium Duty Hook2Loop Bungee Tether can be cinched through this connection point.

D-ring Products
Quick Wrap Tape Products

Back to top


Chisel
Quick Spin—Tools up to 10 lbs (4.5kg) Instruction Guide
Quick Spin Products

Circular Saw
Tool Cinch Medium Duty - Single Wing, Quick Wrap Tape—Tools up to 35 lbs (15.9kg) Instruction Guide
Tool Cinch Products
Quick Wrap Tape Products

Back to top


Claw Hammer
D-ring (1" x 3.5") and Quick Wrap Tape—Tools up to 5 lbs (2.3kg) Instruction Guide
D-rings and Quick Wrap Tape are the ideal attachment point for Claw Hammers without pre-drilled holes.

D-ring Products
Quick Wrap Tape Products

Back to top


Claw Hammer
D-ring Cord—Tools up to 5 lbs (2.3kg) Instruction Guide
D-ring Cords are compatible on Claw Hammers with large enough pre-drilled holes.

D-ring Cord Products

Claw Hammer
Quick Ring—Tools up to 2 lbs (0.9kg) Instruction Guide
Quick Rings are compatible on Claw Hammers with pre-drilled holes. Commonly used by the following crafts: Boilermakers, Scaffold Workers, Welders

Quick Ring Products

Combination Square
D-ring Cord—Tools up to 5 lbs (2.3kg) Instruction Guide
D-ring Cord Products

Back to top


Combination Square
Quick Ring—Tools up to 2 lbs (0.9kg) Instruction Guide
Quick Ring Products

Combination Wrench
Quick Ring—Tools up to 2 lbs (0.9kg) Instruction Guide
A Quick Ring can be fitted around a Combination Wrench as long as there is no risk of the ring slipping off either end of the tool (multiple Quick Ring sizes are available). This is an ideal attachment point for Combination Wrenches as it allows for the Quick Ring to rotate and move which helps prevent tangles, and stays out of the way of the user.

Quick Ring Products

Back to top


Combination Wrench
Tool Cinch Medium Duty - Dual Wing, Quick Wrap Tape—Tools up to 35 lbs (15.9kg) Instruction Guide
For larger wrenches (weighing up to 35 lbs), the Dual Wing Tool Cinch is an ideal attachment. Commonly used by the following crafts: Boilmarkers, Iron Workers, Millwrights

Tool Cinch Products
Quick Wrap Tape Products
Medium Duty Hook2Loop Bungee Tether

Concrete Chisel
D-ring (0.5" X 2.25") and Quick Wrap Tape—Tools up to 2 lbs (0.9kg) Instruction Guide
D-ring Products
Quick Wrap Tape Products

Back to top


Concrete Chisel
D-ring (1" x 3.5") and Quick Wrap Tape—Tools up to 5 lbs (2.3kg) Instruction Guide
D-ring Products
Quick Wrap Tape Products

Contractor Square
D-ring Cord— Tools up to 5 lbs (2.3kg) Instruction Guide
D-ring Cord Products

Back to top


Contractor Square
Quick Ring—Tools up to 2 lbs (0.9kg) Instruction Guide
Commonly used by the following crafts: Welders

Quick Ring Products

Drive Ratchet
Tool Cinch Medium Duty - Dual Wing, Quick Wrap Tape—Tools up to 35 lbs (15.9kg) Instruction Guide
Tool Cinch Products
Quick Wrap Tape Products

Back to top


Electric Drill
Tool Cinch Medium Duty - Single Wing, Quick Wrap Tape—Tools up to 35 lbs (15.9kg) Instruction Guide
Tool Cinch Products
Quick Wrap Tape Products

Back to top


End Cutter
D-ring (0.5" X 2.25") and Quick Wrap Tape—Tools up to 2 lbs (0.9kg) Instruction Guide
D-ring Products
Quick Wrap Tape Products

Back to top


File
D-ring (0.5" X 2.25") and Quick Wrap Tape—Tools up to 2 lbs (0.9kg) Instruction Guide
D-ring Products​​
Quick Wrap Tape Products

Back to top


File
D-ring Cord—Tools up to 5 lbs (2.3kg) Instruction Guide
D-ring Cord Products

File
Quick Ring—Tools up to 2 lbs (0.9kg) Instruction Guide
Quick Ring Products

File
Quick Spin—Tools up to 1 lb (0.5kg) Instruction Guide
Commonly used by the following crafts: Millwrights, Welders

Quick Spin Products

Hacksaw
Quick Ring—Tools up to 2 lbs (0.9kg) Instruction Guide
A Quick Ring can be fitted around the body of a Hacksaw so long as there is no risk of the ring slipping off the tool.

Quick Ring Products

Back to top


Hand Seamer
D-ring (0.5" X 2.25") and Quick Wrap Tape—Tools up to 2 lbs (0.9kg) Instruction Guide
D-ring Products
Quick Wrap Tape Products

Back to top


Handheld Radio
Micro D-ring—Tools up to 2 lbs when used with Clip2Loop Coil Tether Instruction Guide
A Micro D-ring can be applied to most handheld radios. The radio can then be tethered using a Clip2Loop Coil Tether. Commonly used by the following crafts: Scaffold Workers

D-ring Micro Products

Back to top


Impact Wrench
Tool Cinch Medium Duty - Single Wing, Quick Wrap Tape—Tools up to 35 lbs (15.9kg) Instruction Guide
Commonly used by the following crafts: Boilmakers, Iron Workers, Millwrights

Tool Cinch Products
Quick Wrap Tape Products

Back to top


Lineman Pliers
D-ring (0.5" X 2.25") and Quick Wrap Tape—Tools up to 2 lbs (0.9kg) Instruction Guide
D-ring Products
Quick Wrap Tape Products

Back to top


Lineman Pliers
Quick Spin—Tools up to 1 lb (0.5kg) Instruction Guide
Commonly used by the following crafts: Iron Workers, Millwrights, Scaffold Workers, Welders

Quick Spin Products

Linoleum Knife
D-ring (0.5" X 2.25") and Quick Wrap Tape—Tools up to 2 lbs (0.9kg) Instruction Guide
D-ring Products
Quick Wrap Tape Products

Back to top


Linoleum Knife
Quick Ring—Tools up to 2 lbs (0.9kg) Instruction Guide
Commonly used by the following crafts: Electricians, Insulators, Millwrights

Quick Ring Products

Long Nose (Needle Nose) Pliers
D-ring (0.5" X 2.25") and Quick Wrap Tape—Tools up to 2 lbs (0.9kg) Instruction Guide
D-ring Products
Quick Wrap Tape Products

Back to top


Long Nose (Needle Nose) Pliers
Quick Spin—Tools up to 1 lb (0.5kg) Instruction Guide
Commonly used by the following crafts: Boilmakers, Electricians, Millwrights

Quick Spin Poducts

Magbase Drill
Tool Cinch Medium Duty - Single Wing, Quick Wrap Tape—Tools up to 35 lbs (15.9kg) Instruction Guide
Tool Cinch Products
Quick Wrap Tape Products
Medium Duty Hook2Loop Bungee


Magbase Drill
Tool Cinch Heavy Duty—Tools up to 80 lbs (36.3kg) Instruction Guide
Commonly used by the following crafts: Iron Workers

Tool Cinch Heavy Duty Products

Magnetic Level
D-ring Cord—Tools up to 5 lbs (2.3kg) Instruction Guide
D-ring Cord Products

Back to top


Magnetic Level
Quick Ring—Tools up to 2 lbs (0.9kg) Instruction Guide
Commonly used by the following crafts: Iron workers, Millwrights, Scaffold Workers

Quick Ring Products

Permanent Marker
Quick Spin—Tools up to 1 lb (0.5kg) Instruction Guide
This Quick Spin Attachment fits most Permanent Markers, as well as specially designed Permanent Marker Safety Cap that prevents accidental cap drops. Commonly used by the following crafts: Welders

Quick Spin Products

Back to top


Pipe Cutter
D-ring Cord—Tools up to 5 lbs (2.3kg) Instruction Guide
D-ring Cord Products

Back to top


Pipe Cutter
Quick Ring—Tools up to 2 lbs (0.9kg) Instruction Guide
Commonly used by the following crafts: Electricians, Millwrights, Welders

Quick Ring Products

Power Drive / Pipe Thread Drive
Tool Cinch Medium Duty—Tools up to 35 lbs (15.9kg) Instruction Guide
Tool Cinch Products
Quick Wrap Tape Products
Hook2Loop Bungee Tether

Back to top


Power Drive / Pipe Thread Drive
Tool Cinch Heavy Duty—Tools up to 80 lbs (36.3kg) Instruction Guide
Commonly used by the following crafts: Millwrights

Tool Cinch Heavy Duty Products

Putty Knife
D-ring Cord—Tools up to 5 lbs (2.3kg) Instruction Guide
D-ring Cord Products

Back to top


Putty Knife
Quick Ring—Tools up to 2 lbs (0.9kg) Instruction Guide
Commonly used by the following crafts: Millwrights

Quick Ring Products

Retractable Knife / Utility Knife
Quick Ring—Tools up to 2 lbs (0.9kg) Instruction Guide
Commonly used by the following crafts: Insulators and Millwrights

Quick Ring Products

Back to top


Right Angle Drill
Tool Cinch Medium Duty - Single Wing, Quick Wrap Tape—Tools up to 35 lbs (15.9kg) Instruction Guide
Commonly used by the following crafts: Iron Workers

Tool Cinch Products
Quick Wrap Tape Products

Back to top


Right Angle Grinder
Tool Cinch Medium Duty - Single Wing, Quick Wrap Tape—Tools up to 35 lbs (15.9kg) Instruction Guide
Attachment point consideration:
  • Keep the attachment point away from the​ grinding wheel
  • Don't cover the air muffler
  • Keep the attachment point away from the paddle trigger


Tool Cinch Products
Quick Wrap Tape Products

Back to top


Sawzall (Electric)
Tool Cinch Medium Duty - Single Wing, Quick Wrap Tape—Tools up to 35 lbs (15.9kg)
Instruction Guide
Commonly used by the following scrafts: Electricians, Insulators, Iron Workers, and Millwrights

Tool Cinch Products
Quick Wrap Tape Products

Back to top


Scaffold Wrench
D-ring (0.5" X 2.25") and Quick Wrap Tape and Medium Duty—Tools up to 2 lbs (0.9kg) Instruction Guide
D-ring Products
Quick Wrap Tape Products

Back to top


Scaffold Wrench
D-ring Cord—Tools up to 5 lbs (2.3kg) Instruction Guide
D-ring Cord Products

Scaffold Wrench
Quick Ring—Tools up to 2 lbs (0.9kg) Instruction Guide
Commonly used by the following crafts: Scaffold Workers

Quick Ring Products

Scissors
D-ring Cord—Tools up to 5 lbs (2.3kg) Instruction Guide
D-ring Cord Products

Back to top


Scissors
Quick Ring—Tools up to 2 lbs (0.9kg) Instruction Guide
Commonly used by the following crafts: Insulators

Quick Ring Products

Scraper
D-ring (0.5" X 2.25") and Quick Wrap Tape—Tools up to 2 lbs (0.9kg) Instruction Guide
D-ring Products
Quick Wrap Tape Products

Back to top


Screwdriver
D-ring (0.5" X 2.25") and Quick Wrap Tape—Tools up to 2 lbs (0.9kg) Instruction Guide
D-ring Products
Quick Wrap Tape Products

Back to top


Screwdriver
D-ring Cord—Tools up to 5 lbs (2.3kg) Instruction Guide
D-ring Cord Products

Screwdriver
Quick Spin—Tools up to 1 lb (0.5kg) Instruction Guide
Commonly used by the following crafts: Boilermakers, Electricians

Quick Spin Products

Side Cutting Pliers / Wire Snips
D-ring (0.5" X 2.25") Non-Conductive and Quick Wrap Tape—Tools up to 2 lbs (0.9kg) Instruction Guide
D-ring Products
Quick Wrap Tape Products

Back to top


Side Cutting Pliers / Wire Snips
Quick Spin—Tools up to 1 lb (0.5kg) Instruction Guide
Commonly used by the following crafts: Boilermakers, Electricians, Iron Workers, Millwrights, Scaffold Workers, and Welders

Quick Spin Products

Sledge Hammer
Tool Cinch Medium Duty - Dual Wing, Quick Wrap Tape—Tools up to 35 lbs (15.9kg) Instruction Guide
Tool Cinch Products
Quick Wrap Tape Products

Back to top


Sledge Hammer
Tool Cinch Medium Duty - Single Wing, Quick Wrap Tape—Tools up to 35 lbs (15.9kg) Instruction Guide
Commonly used by the following crafts: Boilermakers

Tool Cinch Products
Quick Wrap Tape Products

Sleever Bar
Tool Cinch Medium Duty - Dual Wing, Quick Wrap Tape—Tools up to 35 lbs (15.9kg) Instruction Guide
Commonly used by the following crafts: Iron Workers

Tool Cinch Products
Quick Wrap Tape Products

Back to top


Sliding Bar Clamp
Tool Cinch Medium Duty - Single Wing, Quick Wrap Tape—Tools up to 35 lbs (15.9kg) Instruction Guide
Tool Cinch Products
Quick Wrap Tape Products

Back to top


Slugging Wrench
Tool Cinch Medium Duty - Dual Wing, Quick Wrap Tape—Tools up to 35 lbs (15.9kg) Instruction Guide
Tool Cinch Products
Quick Wrap Tape Products

Back to top


Slugging Wrench
Tool Cinch Heavy Duty—Tools up to 80 lbs (36.3kg) Instruction Guide
Tool Cinch Heavey Duty Products

Soft Face Hammer
D-ring (1" x 3.5") and Quick Wrap Tape—Tools up to 5 lbs (2.3kg) Instruction Guide
D-ring Products
Quick Wrap Tape Products

Back to top


Spark Tool / Flint Striker
D-ring Cord—Tools up to 5 lbs (2.3kg) Instruction Guide
D-ring Products

Back to top


Spark Tool / Flint Striker
Quick Ring—Tools up to 2 lbs (0.9kg) Instruction Guide
Commonly used by the following crafts: Welders

Quick Ring Products

Spud Wrench
D-ring (1" x 3.5") and Quick Wrap Tape—Tools up to 5 lbs (2.3kg) Instruction Guide
When Installing a D-ring on a Spud Wrench, it's important that the D-ring be facing towards the wrench-end of the tool so that the Spud Wrench can be holstered more easily in pouches such as the Utility Pouch. Commonly used by the following crafts: Boilermakers, Iron Workers, Millwrights

D-ring Products
Wrap Tape Poducts

Back to top


Tape Measure
Tape Measure Sleeve —Tools up to 2 lbs (0.9kg) Instruction Guide
Holsters​

Back to top


Valve Wrench
D-ring (0.5" X 2.25") and Quick Wrap Tape—Tools up to 2 lbs (0.9kg) Instruction Guide
D-ring Products
Quick Wrap Tape Products

Back to top


Wire Brush (Tooth Brush)
D-ring (0.5" X 2.25") and Quick Wrap Tape—Tools up to 2 lbs (0.9kg) Instruction Guide
D-ring Products
Quick Wrap Tape Products

Back to top


Wire Brush (Tooth Brush)
D-ring Cord—Tools up to 5 lbs (2.3kg) Instruction Guide
D-ring Cord Products

Wire Brush (Tooth Brush)
Quick Ring—Tools up to 2 lbs (0.9kg) Instruction Guide
Commonly used by the following crafts: Welders

Quick Ring Products

Wire Stripper
D-ring (0.5" X 2.25") and Quick Wrap Tape—Tools up to 2 lbs (0.9kg) Instruction Guide
D-ring Products
Quick Wrap Tape Products

Back to top


Wire Stripper
Quick Spin—Tools up to 1 lb (0.5kg) Instruction Guide
Commonly used by the following crafts: Electricians

Quick Spin Products

Wrecking Bar
Tool Cinch Medium Duty - Dual Wing, Quick Wrap Tape—Tools up to 35 lbs (15.9kg) Instruction Guide
Commonly used by the following crafts: Millwrights

Tool Cinch Products
Quick Wrap Tape Products

Back to top


​​​​​​​​​​​​​​​​​​​​​
3M Fall Protection combines the products and expertise of DBI-SALA® and Protecta® with the technology and innovation of 3M to elevate safety to new heights and keep workers comfortable, confident and safe every time they climb. See our products and services at 3M.com/FallProtection.